Small lubricator standard, G¼, oil mist due to pulsed air flow, MOP 145 psi
Product information "Small lubricator standard, G¼, oil mist due to pulsed air flow, MOP 145 psi"
Oil mist at flowing air stream. Compressed air lubricator for direct connection to compressed air tools such as wrenches, grinders etc. The oil mist is created by a flowing stream of air. Oil dosage is preset. Easy to fill due to oil filler screw. Oil suction: The suction nozzle must be at the lowest point. Oil dosage: The factory-set dosage is approx. 50 mm³ per 1 m³ flow rate. One dosage is sufficient for approx. 10 hours at 100 Nl/min operation.
Bowl variant: | Plastic bowl |
---|---|
Connection: | G ¼ female / male thread |
Device designation: | Small lubricators |
Direction of flow: | any |
Max. operating pressure (p1) [bar]: | max. 8 bar (recommended 6.2 bar) |
Model series: | standard |
Mounting position: | intake nozzle must always be submerged in oil |
Nominal pressure (housing): | PN 8 |
Nominal width: | DN 6 |
Oil dosage: | fixed - approx. 50 mm³ per 1 m³ |
Oil mist: | Oil mist at flowing air stream |
Operating temperature [°C]: | -5 °C up to +60 °C |
Rates of flow [l/min]: | 750 l/min at Δp = 1 bar |
Section: | Compressed air preparation |
Size: | Size 20 |
Usable bowl capacity compressed air lubricators: | 5 ml (approx. 10 hours at 100 Nl/min) |