All blowguns also available without »ewo« logo neutral.
Blowgun (forging) with normal nozzle Ø1,5 mm (Thread M12 x 1,25)
The classic blowgun that has proved its usefulness a million times. Rich assortment of accessoires inchluding nozzles ,extensions and various air connectors.
Pistol-form in aluminium, anodized. Lever operation.
Blowgun with full- jet nozzle in (Alu) Ø 2,5 mm
Full-jet nozzle, wide jet with high air output by means of injector producing high blowing power at sound levels of around 90 dB (A). It is recommended that the full-jet nozzle is used at pressures not higher than 2 bar.
Blowgun with a combined safety and noise-silencing nozzle »Blowstar«
Blowstar, a combined safety and noise-silencing nozzle – to avoid risks and dangers when handling the energy carrier »compressed air«, in particular in direct skin contact. Working conditions are appreciably improved through a substantial reduction in noise to as low as 74 dB (A). In contrast, the noise level of conventional blow nozzles is more than 90 dB (A) at 6 bar. A reduction of the noise level by 8 dB (A) is experienced by the human ear already a half the noise.
Nevertheless, the principle of the full-cone nozzle results in excellent concentric blowing giving maximum efficiency. The resulting blowing power is 2.5 times higher than that of a classic single-hole nozzle.
Thus, the two-part »Blowstar nozzle« is the recommended choice especially for compressed air blow guns, but also as an individually used process nozzle.
It currently meets the following safety regulations and directives:
- BG Institute for Occupational Safety (BIA)
- BG regulation »Noise« (BGV B3, §3)
- OSHA Regulations
- Suisse Accident Insurance Institution (SUVA)
Blowgun with »Safetystar« extension
Star-shaped safety nozzle avoiding risks and dangers when handling the energy carrier »compressed air« in particular in direct skin contact. Improved working conditions because of reduction of noise down to 80 db (A) and below.
It currently meets the following safety regulations and directives:
- BG Institute for Occupational Safety (BIA)
- BG regulation »Noise« (BGV B3, §3)
- OSHA Regulations
- European Community Directive for machines 98/37/EG
Blowgun with dosage
Blowcontrol (diecasting) with normal nozzle Ø1,5 mm (thread M12 x 1,25)
The Aluminium blowguns with dosage are a further development of our model 269. The flow can be adjusted continuously by means of the lever up to the maximum power. This allows an individual adjustment of the blowing force suitable for a large range of applications.
All nozzles, as well as the extensions and accessories for the normal model 269, can be used with the adjustable blowgun.
Suction gun (Aluminium)
to dust and dirt such from splinters (After the change to surfaces dry suitable).
Polyamide Blowgun with dosage
The robust polyamide-blowgun with dosage out of blue crystal ball consolidated polyamide (longer life-time). As further development of the aluminium blowgun can be recommended in different applications such as weight- and material prefered reasons (textile industry, electronic devices etc…)
Infinitely variable with dosage adjustment by pressing the lever.
All nozzles and extensions from the aluminium blowgun are suitable for this blowgun.
Blowing set – airprofi –
Polyamide blowgun with dosage extension and PU-spiral hose
blowing set (3 m) – Polyamide blowgun with extension, spiral hose 3 m mounted with brass coupling and plug DN 7,2
blowing set (6 m) – Polyamide blowgun with extension, spiral hose 6 m mounted with brass coupling and plug DN 7,2
blowing set (6 m, safetystar-extension) – Polyamide blowgun with extension, spiral hose 6 m mounted with brass coupling and plug DN 7,2
Rubber Blowgun
This blowgun is the ideal unit for all situations in which sensitve surfaces must not be damaged through contact (dental and paint Spraying applications). Operation by bending the rubber mouthpiece. Recommended working pressure : 1 – 6 bar
Straight Blowgun
Ø 2,0 mm nozzle
Nozzles for Alu- and Polyamide Blowgun
Safety-flat beam nozzle application for process-nozzle (carry and cooling and for blowguns) Typ 470 and 269.
- Normal nozzle Ø1,5
- Silent nozzle
- Full-jet nozzle
- Air shield nozzle
- Safety and noise-silencing nozzle –blowstar–
- Extension (Steel, nickel-plated)
- Bicycle nipple
Washing Guns
High-pressure washing guns (in brass and aluminium for long life) can be connected to water pumps for working pressures up to 40 bar.
Two models: one is regulated manually with a handwheel, the other is a safety model with lever operation for »open« and »shut«.
The jet can be adjusted from full jet to spray.
Safety Washing Guns –multiclean– (Aluminium )
with lever and adjusting wheel ( Recommended for cooling liquids on maching centers)
Kontakt
Sie haben Fragen zu unseren Produkten?
Wir sind telefonisch Mo. – Do. von 7:30 bis 17:00 Uhr und Fr. bis 13:30 Uhr für Sie erreichbar.ewo Hotline: +49 (0)711 7813 0
ewo Direkt: info@ewo.de
Contact
Do you want to know more about our products?
Please call us MO–THU 7:30 – 17:00 and FR until 13:30.ewo-Hotline: +49 (0)711 7813 0
ewo Direct: info@ewo.de
Contact CN
Katalogbestellung
Sie möchten einen ewo Katalog bestellen?
Order our Catalog
Order our Catalog (CN)
ISO9001 DE
Sie brauchen einen verlässlichen Partner?
ISO9001 EN
ISO9001 CN